All brands
Compatibility Guide

Keep Your Epilog Running Without a Roof Vent

From the Zing to the Fusion Pro, Epilog machines demand 350-735 CFM of exhaust. PURE-AIR's high-static-pressure extractors deliver that airflow through true H14 + carbon media — recirculating clean air back into your shop, so awards engravers and sign shops can run in strip malls, basements and office parks.

In stock — US warehouse2-4 day deliveryAdapter included option

Sound familiar?

  • Fusion Pro 48 requires up to 735 CFM — most box fans and hobby filters fall far short
  • Storefront and office locations can't cut holes for exhaust ducting
  • Engraving anodized aluminum and acrylic all day saturates small carbon filters fast

PURE-AIR fixes all three: bigger carbon beds, high-capacity filter stacks, and adapters machined for your exhaust port.

Verified compatible machines

  • Zing 16 / 24
  • Fusion Maker / Edge 12-36
  • Fusion Pro 32 / 48

Don't see your machine? Use the compatibility checker on any product page, or ask us — adapters cover 60/75/100 mm ports.

Recommended for Epilog Laser owners

Your Complete Setup

PA-FS400 US Stock
PA-FS400 Non-metal Fume Extractor2-4 Day Delivery

400 m³/h

Airflow

8,000 Pa

Pressure

< 60 dBA

Noise

PA-FS400 Non-metal Fume Extractor

8,000 Pa suction that stays strong as filters load up.

Pricing on request
PA-FS500 US Stock
PA-FS500 Pro Fume ExtractorFreight or LTL

500 m³/h

Airflow

10,000 Pa

Pressure

< 60 dBA

Noise

PA-FS500 Pro Fume Extractor

10,000 Pa workhorse for busy studios and small shops.

Pricing on request
ReplacementSubscribe & Save 15%
Replacement Filter SetUS Stock

PA-F250s / FS300s / FS400 / FS500

Fits

H14 (99.99% @ 0.3µm)

HEPA Grade

Treated activated carbon

Carbon

Replacement Filter Set

Pre-filter + F9 + HEPA H14 + treated carbon.

Pricing on request
In the field

How Epilog Laser Owners Use PURE-AIR

Typical application scenarios drawn from how shops and facilities pair PURE-AIR extraction with Epilog Laser platforms.

Strip-mall awards shop runs a Fusion Pro with zero ductwork

An awards & personalization storefront in a leased retail unit

Fusion Pro 32 (60 W CO2)PA-FS500

Challenge: The landlord would not permit exterior wall penetrations, but the Fusion Pro's exhaust requirement is far beyond what hobby-grade filter boxes deliver — acrylic odor was reaching neighboring tenants.

Outcome: Running the FS500 in recirculating mode held visible smoke clearance at the lens carriage even on full-sheet acrylic engraves. The deep carbon bed keeps the sales floor odor-neutral, and quarterly filter swaps take under ten minutes.

Basement engraving business protects living space above

A home-based engraving business operating a Zing in a finished basement

Zing 24 (40 W CO2)PA-FS400 + Replacement Filter Set

Challenge: Venting through the foundation was not an option, and anodized-aluminum and acrylic jobs were saturating a small hobby filter every few weeks.

Outcome: The FS400's larger carbon mass extended replacement intervals several-fold at the same duty cycle, and the HEPA H14 stage keeps particulate out of the home's shared air. The household upstairs no longer notices when production is running.

Scenarios are representative applications based on published machine exhaust specifications and PURE-AIR unit performance; individual results vary with materials and duty cycle.

Frequently Asked Questions

Still stuck? Ask an engineer