Will It Fit My Laser?
Every popular desktop laser, mapped to the right PURE-AIR extractor, exhaust-port size and adapter. Find your machine below — setup takes under 10 minutes with our included ring kit.
Find My Extractor in 10 Seconds
| Your Machine | Laser Type | Exhaust Port | Recommended | Step-up Pick | Engineer's Note |
|---|
Match airflow to bed size
Up to 30×50 cm beds: 250-300 m³/h. 40×60 cm: 400 m³/h. 80×100 cm and up: 500+ m³/h. Enclosed machines need less airflow but more static pressure.
Check your port, not just the brand
The same brand ships different vent sizes: Glowforge Pro uses 100 mm while Aura uses 50 mm. Our Universal Adapter Kit covers 50/75/100 mm with clamped rings.
Cutting daily? Size up once
Filters last longest when the blower isn't running flat-out. If you cut MDF or acrylic more than 10 hrs/week, choose the step-up pick — it pays for itself in filter life.
Most-Recommended Extractors
3-7 Business Days
PA-F200s Portable Fume Extractor
Ultra-light entry extractor for portable & small diode lasers.
3-7 Business Days
PA-FS300s Non-metal Fume Extractor
Triple-stage filtration for A4-format laser cutters.
3-7 Business Days
PA-FS400 Pro Fume Extractor
8,000 Pa suction that stays strong as filters load up.
Can't Find My Machine?
Tell us your laser model and we'll map it — every submission goes straight to our engineering backlog and shapes which adapter kits we build next. Leave your email and we'll reply within one business day with a sizing recommendation.
- ✓ Personal reply from an engineer, not a bot
- ✓ Your machine gets added to this guide
- ✓ Adapter kits prioritized by demand